Note) 0i-C does not support the HSSB function. This function can be used in any CNC mode. This function is not related to CNC parameter. However, in case of Series 16i/18i-B and 0i-F, 30i, the required CNC option is as follows.Ībove two optional functions are not required. The Ethernet function and the extended driver/library function are necessary. The extended driver/library function is necessary. This function needs the machining time stamp function. This function need the following CNC option. The machining time stamp option and the coextended driver/library function are necessary.Īs for the other return codes or the details, see Valid range: 0 to 59ĮW_OK is returned on successful completion, otherwise any value except EW_OK is returned. Valid range: 0 to 59 second Second part of the processing time stamp data. ![]() ![]() Valid range: 0 to 999 minute Minute part of the processing time stamp data. Valid range : 0 to 10 prg_no Program number Valid range: 1 to 9999 (Valid range: 1 to 99999999 for program number 8 digits) hour Hour part of the processing time stamp data. The number of measured processing time stamp data is returned. Num The number of processing time stamp data. Pointer to the ODBPTIME structure where returned data are stored.
0 Comments
Leave a Reply. |